Where Does The Footrest Spring Go On A Recliner: Simple Steps To Proper Installation

Have you ever experienced the ultimate relaxation of stretching out on a recliner, only to have your tranquility shattered by a broken footrest? We’ve all been there, desperately wondering where that pesky footrest spring goes.

Fear not, dear reader, for we are about to embark on a journey of recliner repair. Get ready to unleash your inner handyman as we delve into the art of dismantling bolts, replacing springs, and scrutinizing loose screws.

But beware, for as we traverse the realm of recliner resurrection, we must remember to handle our footrests with care. So, join us as we unlock the secrets of recliner restoration, where the mysterious placement of the footrest spring awaits!

Where Does The Footrest Spring Go On A Recliner

The footrest spring on a recliner goes in the mechanism that controls the movement of the footrest. Specifically, it is located within the inner workings of the recliner, typically near the pivot point of the footrest.

The spring provides tension and support to allow the footrest to extend and retract smoothly.

Key Points:

  • The footrest spring is an important component of a recliner’s mechanism.
  • It is positioned within the inner workings of the recliner, usually near the footrest’s pivot point.
  • Its main function is to offer tension and support for the smooth extension and retraction of the footrest.
  • The footrest spring is responsible for controlling the movement of the footrest.
  • Without the spring, the footrest may not function properly.
  • Overall, the footrest spring plays a crucial role in allowing the recliner’s footrest to operate smoothly.


Check this out:

💡 Pro Tips:

1. Ensure the spring is securely attached to the footrest mechanism before reassembling the recliner.
2. Use a flashlight to inspect the footrest mechanism for any missing or broken parts.
3. When replacing the spring, make sure it is the correct size and tension for your specific recliner model.
4. If you cannot find the exact replacement spring, consult a professional or contact the manufacturer for guidance.
5. Take pictures or make careful notes during the disassembly process to aid in reassembling the recliner correctly.

Removing And Replacing The Footrest Spring

When it comes to fixing a broken recliner footrest, one of the first things you need to do is remove the bolts on the footrest using an adjustable wrench. This will allow you to access the spring and replace it with a new one.

Here are the steps you should follow:

  1. Start by flipping the recliner over on its back, making sure it is stable and secure.

  2. Locate the bolts that hold the footrest in place.

You can usually find them on the sides or bottom of the footrest mechanism. 3.

Using an adjustable wrench, carefully loosen and remove the bolts. Make sure to keep track of them to avoid losing any during the process.

  1. Once the bolts are removed, you should be able to detach the footrest from the recliner’s frame.

  2. Take out the broken spring and replace it with a new one.

Ensure that you choose a spring with the same dimensions as the original to ensure proper functionality. 6.

Carefully reattach the footrest to the recliner’s frame by securing the bolts back in place. Tighten them securely to ensure a stable installation.

Remember to test the footrest after replacing the spring to ensure it moves smoothly and securely.

Checking The Warranty And Tightening Loose Screws

If you are experiencing issues with your recliner footrest, it is essential to check if your recliner is still under warranty. Many manufacturers offer warranties that cover repairs or replacements for faulty parts.

Contact the manufacturer or consult the warranty documentation to understand the terms and conditions.

In addition to checking the warranty, it is also crucial to inspect the recliner for any loose screws. Over time, the constant use of the footrest can cause screws to become loose, leading to instability.

Use a screwdriver to tighten any loose screws you may find. Pay special attention to the areas where the footrest connects to the recliner’s frame.

Note: If you are unsure about any aspect of repairing your recliner footrest, it is recommended to seek professional help to avoid further damage or voiding the warranty.

Lubricating The Recline For Smoother Operation

One common issue that recliner users face is a stiff or jerky footrest operation. This can be due to a lack of lubrication in the recliner mechanism.

To improve the smoothness of the footrest, follow these steps:

  1. Begin by flipping the recliner over and accessing the underside of the chair.

  2. Locate the recliner’s mechanism, which is usually covered by a fabric or plastic protective covering.

  3. Carefully remove the screws or fasteners holding the protective covering in place.

  4. Once the mechanism is revealed, inspect it for any signs of debris or dirt buildup.

Remove any visible dirt or debris using a soft brush or cloth. 5.

Using a specific lubricant for mechanical parts, spray the joints and sockets of the footrest mechanism. Ensure that the lubricant reaches all the moving parts for maximum effectiveness.

  1. After applying the lubricant, wipe off any excess oil to prevent it from staining the fabric or interfering with the recliner’s performance.

  2. Carefully reassemble the recliner mechanism and test the footrest to ensure it moves smoothly and without any jerky motions.

Note: It is important to use a lubricant designed specifically for mechanical parts to avoid damaging the recliner’s mechanism.

Accessing The Mechanism By Flipping The Chair Over

To access the recliner’s footrest mechanism, you will need to flip the chair over carefully. Follow these steps to ensure a safe and successful process:

  1. Clear the area around the recliner to ensure you have enough space to work comfortably.

  2. Make sure that the floor is clean and free from any obstacles that could cause you to slip or lose balance.

  3. Carefully tilt the recliner backward, ensuring that the weight is distributed evenly to avoid tipping.

  4. Slowly lower the recliner onto its back, making sure that none of the chair’s components are damaged or crushed during the process.

  5. Once the recliner is securely positioned on its back, you will have easy access to the footrest mechanism for repairs or lubrication.

Note: Use caution when flipping the recliner to avoid any injuries or damage to the chair.

Applying Lubricant To Joints And Sockets

To ensure smooth operation of the recliner footrest, it is crucial to apply lubricant to the joints and sockets of the mechanism. Follow these steps to properly lubricate the recliner:

  1. Once you have flipped the recliner over and accessed the mechanism, visually inspect the joints and sockets.

  2. Look for any signs of wear, dirt, or debris that may be interfering with the smooth movement of the footrest.

  3. Using a lubricant specifically designed for mechanical parts, carefully spray the joints and sockets, ensuring that the lubricant reaches all the moving parts.

  4. Move the footrest back and forth a few times to help distribute the lubricant evenly along the mechanism.

  5. Wipe off any excess oil to prevent it from staining the fabric or interfering with the recliner’s performance.

  6. Reassemble any protective coverings or parts that were removed during the process.

  7. Test the footrest to ensure that it moves smoothly after the application of the lubricant.

Note: Always follow the manufacturer’s recommendations regarding lubricants and application techniques for your specific recliner model.

Troubleshooting And Fixing Common Recliner Footrest Issues

Recliner footrests can experience various issues that may hinder their functionality. Here are some common problems you may encounter and possible solutions:

  1. Stiff or stuck footrest: A footrest that is difficult to move or gets stuck in one position can be caused by a broken or worn-out ratchet mechanism.

In this case, it may be necessary to replace the ratchet mechanism to restore proper functionality.

  1. Uneven or wobbly footrest: If your recliner footrest is unstable or wobbly, it could be due to loose screws or worn-out components.

Check for any loose screws and tighten them securely. If the problem persists, it is advisable to seek professional assistance.

  1. Footrest not locking in place: If the footrest does not lock in place when fully extended, it could be due to worn-out locking mechanisms.

Replace the faulty locking components with new ones to ensure proper functionality.

  1. Footrest not retracting fully: If the footrest does not fully retract, it may be due to worn-out springs or damaged components.

Consider replacing any faulty parts to restore the footrest’s full range of motion.

  1. Footrest making unusual noises: If the footrest produces loud or unusual noises during operation, it may be due to lack of lubrication or worn-out components.

Lubricate the mechanism and inspect for any damaged or worn parts that may need replacement.

Remember, if you are unsure or uncomfortable with fixing the footrest issue yourself, it is always best to reach out to a professional for assistance.

Related posts

Leave a Reply

Your email address will not be published. Required fields are marked *