How To Put The Back On A Lazy Boy Recliner

Trying to put the back on a lazy boy recliner can be tedious and frustrating. Getting the right size bolts, finding the right spots of the chair’s back and trying to stretch it all out is no easy task. It takes lots of patience and precision.

We will guide you step-by-step through the process, from front to back. We’ll talk through all the tools, one by one, that you’ll need. We’ll help you understand how to measure for success with your lazy boy recliner so that you can get it put back on in short order.

Tips for Easily Putting the Back on a Lazy Boy Recliner

If you have a Lazy Boy recliner with a detachable back, you may find it difficult to put the back on the chair. Here are some tips to make it easier.

First, remove the seat cushion and set it aside. This will give you more room to work and make it easier to reach the back.

Next, locate the two metal brackets that hold the back in place. You’ll find them on either side of the chair, just below the armrests.

Using a screwdriver, loosen the screws that hold the brackets in place. Be careful not to remove them completely, as you’ll need to put them back in later.

With the screws loosened, you should be able to lift the back off of the chair. If it’s stuck, try wiggling it back and forth until it comes loose.

Make sure that the back is positioned correctly before you start. The back should be at a 90-degree angle to the seat, with the top of the backrest level with the top of the seat.

Insert the two metal rods into the holes at the top of the backrest. These rods will fit into holes on the underside of the seat.

Push the backrest firmly onto the seat until you hear it click into place.

If your model has a lever on the side of the chair, pull it up to lock the backrest in place.

Line up the brackets with the holes in the frame of the chair, and then tighten the screws until they’re snug.

Finally, replace the seat cushion and enjoy your newly reassembled Lazy Boy recliner.

Sit back and enjoy your newly reclined chair.

How to Avoid Common Mistakes When Putting the Back on a Lazy Boy Recliner

If you’ve ever put the back on a Lazy Boy recliner, you know that it can be a bit tricky. There are a few common mistakes that people make when doing this, and we’re here to help you avoid them!

One common mistake is not lining up the holes correctly. The back of the recliner has two holes near the top, and these need to line up with the corresponding holes on the frame of the chair. If they’re not lined up correctly, it can be very difficult to get the back on properly.

Another common mistake is not putting the back on squarely. This can cause the back to sit at an angle, which is not only unsightly but can also be uncomfortable. Make sure that you line up the back evenly with the frame before attaching it.

Finally, some people try to force the back onto the frame when it’s not lined up correctly. This can damage both the back and the frame, so it’s best to avoid it altogether. If you find yourself having trouble getting the back on, take a step back and double-check that everything is lined up correctly. Once everything is in place, it should go on smoothly.